Donut Pattern ★ Pattern Vinyl | Faux Leather | Sublimation (TAT 3 BUS DAYS)
Order this pattern as adhesive vinyl, heat transfer vinyl, sublimation transfers, or faux leather. Use the first drop down to select the material type and size.
Use the second drop down to select the design option. Each image will have a letter in the corner or in a header across the top of the image with the design option.
Use the radio buttons to choose if you would like your sheet scaled (tiled) smaller. Please refer to the last 3 photos to see example of scales based on the material type, sheet size, and scale selected. Please note that ombre/gradient patterns can only be scaled up to 50% smaller.
To see a close up of each pattern, please click the thumbnails or use the arrows to scroll. You can also click zoom to see a close up of each picture.
PLEASE NOTE THE FOLLOWING:
★★Sublimation★★
★For Sublimation transfers, the ink is all that will transfer so any areas in white will NOT be white. The shirt/blank you are pressing onto will show in the areas of the pattern that have white.
★Sublimation patterns will be mirrored and require a heat press to transfer. The time and temp settings are 385 for 45-60 minutes for apparel and times vary depending on the blank for other substrates.
★Sublimation transfers will only work if the substrate you are applying them to have a high polyester content or a coating that is able to accept the ink. We recommend at least 65% polyester content for apparel.
★Sublimation transfers come in either 11×11 inch or 11×22 inch
★★Vinyl (Adhesive/Heat Transfer)★★
★Vinyl is printed on a white material so white areas will be part of the final product.
★Choose ADHESIVE if you want to use the vinyl to make decals.
★Choose HEAT TRANSFER if you want to use the vinyl to apply designs to apparel or other fabric.
★★Faux Leather★★
★All faux leather sheets will have the same scale as the 6×12 size.
★A 6×12 sheet in faux leather and vinyl will be the same scale.
★A 12×12 or 12×24 in faux leather will be scaled to the same scale as a 6×12 which is a smaller scale compared to vinyl sheets of the same size.
★Please refer to the last picture for reference on how faux leather will be scaled compared to other products.
Here are more details about each of the material options:
★★Gloss/Matte Adhesive★★
Printed on Orajet 3651 (most comparable to Oracal 651)
This is adhesive vinyl which means it has a sticky backing and it is used primarily for making decals. It can stick to most non-porous surfaces.
★★Specifications★★
★2.75 mils thick
★Permanent Adhesive
★Available in Gloss or Matte (use drop down to select your preference)
★Not recommended for use on walls
★Rated for 3 years of outdoor use with no lamination
★Rated for 6 years of outdoor use WITH lamination
★Rated for 5 years of indoor use without lamination
★Rated for 200 years of indoor use without lamination if out of direct sunlight.
★Available in 6×6, 6×12, 12×12, and 12×24 inch sheets (see link below to purchase roll sizes!)
★★Removable Adhesive★★
Printed on Orajet 3621 (most comparable to Oracal 631)
This is adhesive vinyl which means it has a sticky backing and it is used primarily for making wall decals. It can stick to most non-porous surfaces. This vinyl is different from the first option in that it has a removable adhesive. This means that the adhesive is water-based and not as strong as permanent adhesive. It’s primary purpose is for making wall decals as it removes cleaner and easier without peeling the paint.
★★Specifications★★
★3 mils thick
★Matte Finish
★Removable Adhesive
★Safe for Walls
★Not recommended for outdoor use
★Rated for 5 years of indoor use without lamination
★Rated for 200 years of indoor use without lamination if out of direct sunlight.
★Available in 12×12, and 12×24 inch sheets (see link below to purchase roll sizes!)
★★Heat Transfer Vinyl★★
Printed on Stahls’ Heat Transfer
This vinyl is used to heat apply designs to apparel with an iron or heat press.
★★Specifications★★
★Semi-Matte Finish
★Carrier sheet not attached (comes separate)
★Cut normally (do NOT mirror)
★Weed and then mask
★Includes separate reusable MEDIUM TACK masking/carrier sheet (One sheet for every 3 sheets of vinyl ordered)
★Available in 6×6, 6×12, 12×12, and 12×24 inch sheets (see link below to purchase roll sizes!)
★★Compatible Fabrics★★
★100% Cotton
★100% Polyester
★Poly/Cotton Blends
★Can be used on light OR dark garments!
★★Faux Leather★★
Printed on a white textured vinyl fabric with a soft mesh backing. It has a semi-gloss finish with a leather-like grain.
Faux leather cannot be heat applied but is normally cut into shapes to make items including earrings, bows, bags, keychains, and other accessories. We do not recommend it for upholstery. It can also be used with embroidery.
★★Specifications★★
★Semi-Gloss Finish
★ .80 mm thick
★When cutting with a craft cutter, we recommend cutting from the back instead of the printed side
★Available in 6×12, 12×12, and 12×24 inch sheets (Note that all sheets will have the same scale as a 6×12 which is smaller scale than vinyl and sublimation will be.)
★★Sublimation★★
Printed on a white sublimation paper with a wide format Sublimation printer.For Sublimation transfers, the ink is all that will transfer so any areas in white will NOT be white. The shirt/blank you are pressing onto will show in the areas of the pattern that have white.
★★Specifications★★
★Can be used as is for sublimation, to cut into smaller pieces to sublimate small blanks or can be used as a single sheet to sublimate apparel with the “tie dye” effect
★Available in 11×11 or 11×22 inch sheets (Note that 11×22 will be two copies of a 11×11 sheet side by side.)
★Must be applied with a heat press. The time and temp settings are 385°F to 400°F for 45-60 seconds for apparel and times vary depending on the blank for other substrates.
★Must be a sublimation blank or have a high polyester count/coating for sublimation to properly work. We recommend 65% or higher poly for apparel.
★Design will be mirrored before printing
★★Important Notes★★
★When working with printed adhesive vinyl, we recommend bumping up your settings just slightly since the printed vinyl is a tiny bit thicker than standard vinyl and also reverse weeding. Our tutorial on how to reverse weed can be found on our tutorial page (http://howto.smashinginkvinyl.com).
★Printed heat transfer vinyl is thinner and is cut normally like 651 and NOT mirrored. The carrier sheet is separate than the vinyl sheet because of the printing process.
★We include one carrier sheet for every three sheets of heat transfer vinyl that is ordered.
★For a step by step tutorial on using Printed HTV, please visit http://howto.smashinginkvinyl.com.
★We are not responsible for issues with equipment, settings, or other errors. There are many factors that can affect how your machine cuts so we always recommend making a test cut.
★Screen colors and print colors may vary because of screen and monitor settings.
★Colors may also vary from batch to batch and material type since sheets are printed as they are ordered in small batches and different material finishes may affect the look of the sheet.
★Patterns printed on a 6×6 or 6×12 sheet will be proportionally smaller than our larger sheets. See example photo to see scale comparison between different sizes.
★6×12 and 12×24 sheets will have two copies of the pattern repeating. Please refer to the listing photos for examples of how patterns will look at each size option. The pattern will be seamless if possible, but some designs may have the 2nd copy of the design mirrored to blend the pattern at the seam.
★Any patterns described as glitter, metallic, hologram, holographic, or any other texture is based on the look of the pattern and the material will not actually have these textures or finishes. Please note that these types of designs are PRINTED to achieve these effects and do not actually have these finishes or textures.
★Pattern is printed on the non-adhesive side only. The adhesive side is GREY or WHITE. This product will NOT work for projects where the adhesive side faces out since this side of the vinyl is not printed.
★Each sheet has a .25 to .50 inch label which includes the Pattern SKU, Type of Vinyl, our Website, and Tutorial Website. This label is added to the sheet size you order. For example, a 12×12 sheet would actually measure 12.25×12 with the label.
★Sheets are cut by hand or machine and may vary in size by +/- 1/2 inch. Some sheets may have a small extra white boarder because of the cutting process.
★★Links★★
12 inch or 24 inch Rolls of Vinyl by the Foot
How to Use Resources
FAQ Section
Order Custom Pattern Vinyl
Order Custom Sublimation
Order Custom Faux Leather
